International Exhibition of Outdoor Furnishing, SUN,Rimini,Italy 2008SAMP, Pesaro,Italy, 2008 International Furniture ShowPromosedia, Udine,Italy 2008 Italian Chair ExhibitionTriennale, Milan Italy, The Permanent CollectionXYLEXPO 2008 woodworking technologies: Milan ItalyFiera internazionale del mobile, Milan Italy,2008Since over four decades we have been manufacturing the best italian sawing machines for cutting all kinds of steel.
Mep Saws company can offer you more than 50 models to carry out cuts of various materials:
wood, steels, light alloys, ferrous materials, aluminium, bronze, copper, in light and heavy industry.
Some models:
Shark 282 CNC FE, electropneumatic automatic bandsawing CNC with multimicroprocessor with controlled double axis so as to obtain, on the same bar, 32 different lots each of different lengths and quantities.
Machine which can operate also in semi-automatic, manual and semiautomatic/dynamic mode to cut from 45° right up to 60° left.
A FEW FEATURES
* Semi-automatic/dynamic cycle: lowering the head manually, so as to position it just above the material, the semi-automatic cycle starts by pressing trigger switch on handle.
* Manual and semi-automatic/dynamic cycle so as to make odd cuts mindless of previous program parameters.
* Cabinet for electrical and electronic equipment with totally identifiable wiring.
* Panel with low tension controls: polyester membrane keypad with tactile thermo-shaped buttons which give out an acoustic signal when pressed.
* DISPLAY: 40 characters read on sixteen lines so as to visualize technological parameters such as:
-band speed
- number of cuts programmed and carried out
- band thickness - length fed in each stroke
- cutting time - ampermeter - band tensioning
- diagnostics and/or caution messages (approx.ly 80) visualized in the language of use.
* Emergency with indication of band cover open.
* Emergency with indication of safety rail disactivated.
SHARK 282 CNCFE
* IP55 control handle for manual cycles.
* Electronic transducer to visualize band tensioning.
* Wire chip brush to keep blade clean.
* The headstroke, according to the dimensions of the material which has to be cut, is set directly from the control panel.
* Adjustable precision stops for cuts at 0°, 45°, 60° left and 45° right.
* Wide rotating table mounted on a 265mm roller bearing, prewinded with axial bearing.
* Sliding vice with sideways movement and fast-positioning system.
* Feeder operated by stepper motor with screw/nut recirculating ballscrews (feed in length in one stroke: 500mm).
* Feeder carriage has a sideways movement so as to feed in also deformed bars.
* Acoustic indicator with flashing light in case cycle is stopped.
* Automatic adaptive shearing stress control system with servovalve mounted directly on the cylinder.
* Band rotation control to stop it in case it jams.
* Coolant tank inside the steel base with two electric pumps so as to lubro-refrigerate band.
* Coolant pistol to keep working surfaces clean.
* The drawer to collect chips can be replaced with a motorized chip evacutor (see optionals).
* Control and function systems protected against in-going and/or out-going electrical and electromechanical phenomena.
* Machine predisposed for handling with movement equipment.
* Bi-metal band for solids and sections.
* Service keys and instructions manual, for maintenance and spare parts list.
TIGER 350 CNC , automatic/semi-automatic electropneumatic vertical CNC italian sawing machine to cut from 60° left up to 45° right.
Machine with controlled double axis multimicroprocessor so as to obtain, on the same bar, 32 different lots, each of different lengths and quantities.
A FEW FEATURES:
* Head moves vertically on prismatic guides with adjustable taper gib.
* Double set of gears to obtain a high performance.
* Four speed blade rotation: 2 speeds by electric motor and 2 speeds with mechanical shift.
* Pneumatic vertical vice.
* Panel with low tension controls: polyester membrane keypad with tactile thermo-shaped buttons which give out an acoustic signal when pressed.
* Control and function systems protected against in-going and/or out-going electrical and electromechanical phenomena
* DISPLAY: 40 characters read on sixteen lines so as to visualize technological parameters such as:
-band speed
- number of cuts programmed and carried out
- band thickness
- length fed in each stroke
- cutting time
- ampermeter
- band tensioning
- diagnostics and/or caution messages (approx.ly 80) visualized in the language of use.
TIGER 350 CNCFE
* Regulation head stroke according to dimensions of material which has to be cut, is programmed from control panel.
* Adaptive shearing stress control system.
* Barfeed is obtained by means of screw/nut with recirculating ballscrews with D.C. motor.
* The feeder carriage is mounted, by means of sleeves with recirculating ballscrews, on guided and hardened steel guides.
* Wire chip brush for band cleaning.
* Flashing indicator light in case machine is stopped.
* Whole strong structure in electrowelded steelwork predisposed for handling with movement equipment.
* Circular blade HSS DMO 5 diam. 350x32x2.5 for solids or sections.
* Predisposed to mount loading table.
* Service keys and instructions manual, for maintenance and spare parts list.
CONDOR 90 CNC HR electropneumatic automatic italian sawing machine to cut aluminium and light alloys, using a widia blade.
Besides in the automatic mode, it can be used also in semi-automatic cycle.
CNC machine with multimicroprocessor so as to obtain at 0°, on the same bar,32 different lots each of different lengths and quantities. The machine is supplied predisposed to operate together with the loading magazine CB 6000 for high production.
A FEW FEATURES:
* 2 pole motor at 2800 rev/min with double belt transmission
* Widia blade with electrowelded hard metal plates diameter 300x32x3.2mm Z72 positiv rake, balanced and silenced.
* Cabinet for electric and electronic fixtures with totally identifiable wiring.
* Panel with low tension controls: polyester membrane keypad with tactile thermo-shaped buttons which give out an acoustic signal when pressed.
* Control and function systems protected against in-going and/or out-going electrical and electromechanical phenomena.
* DISPLAY: 40 characters read on sixteen lines so as to visualize technological parameters such as:
- number of cuts programmed and carried out
- blade thickness - length fed in each stroke
- cutting time
- ampermeter
- diagnostics and/or caution messages (approx.ly 80) visualized in the language of use.
CONDOR 90 CNCHR
* Feeding system by means of screw/nut with recirculating balls and stepper motor, length 1000mm with feed in up to 9000 mm/min.
* Minimum restpiece which cannot be fed in in automatic is 70mm.
* Feeder carriage which has a sideways movement so as to feed in also deformed bars.
* Automatic adaptive shearing stress control system with servovalve mounted directly on the cylinder.
* Automatic device for blade lubrication which operates only while cutting.
* Drawer to collect chips.
* Chip conveyor is predisposed to mount a chip collector.
* The headstroke, according to the dimensions of the material which has to be cut, is set directly from the control panel.
* Acoustic indicator with flashing light in case cycle is stopped.
* Machine predisposed for handling with movement equipment.
* Service keys and instructions manual, for maintenance and spare parts list.
COBRA 350 CNCFE, automatic/semi-automatic electropneumatic CNC italian sawing machine to cut aluminium and light alloys solids and/or sections using blade with electrowelded hard-metal plates.
The machine cuts from 45° right up to 45° left and the head tilts from 0° up to 45° left so as to make inclined cuts.
Machine with controlled double axis multimicroprocessor so as to obtain, on the same bar, 32 different lots, each of different lengths and quantities.
A FEW FEATURES:
* Panel with low tension controls: polyester membrane keypad with tactile thermo-shaped buttons which give out an acoustic signal when pressed.
* Control and function systems protected against in-going and/or out-going electrical and electromechanical phenomena
* DISPLAY: 40 characters read on sixteen lines so as to visualize technological parameters such as:
- band speed
- number of cuts programmed and carried out
- band thickness - length fed in each stroke
- cutting time - ampermeter
- band tensioning
- diagnostics and/or caution messages (approx.ly 80) visualized in the language of use.
* Regulation head stroke according to dimensions of material which has to be cut, is programmed from control panel.
COBRA 350 CNC
* Adaptive shearing stress control system.
* Pneumatic vertical vice.
* Barfeed is obtained by means of screw/nut with recirculating ballscrews with D.C. motor.
* Feeder carriage is mounted, by means of sleeves with recirculating ballscrews, on guided and hardened steel guides.
* Flashing indicator light in case machine is stopped.
* Predisposed to mount loading table.
* Whole strong structure in electrowelded steelwork predisposed for handling with movement equipment.
* Service keys and instructions manual, for maintenance and spare parts list.
MEP SAWS S.P.A.
HEAD QUARTERS
VIA PAPA GIOVANNI XXIII, 49
61045 Pergola (Pesaro Urbino) ITALY
tel.:+39 0721 73721
tel.:+39 0721 734533
infomep@mepsaws.it
website: Mep Saws
MANUFATCURING SITE
VIA ENZO MAGNANI, 7
61045 Pergola (Pesaro Urbino) ITALY
telephone:+39 0721 73721
telefax:+39 0721 734533
DELIVERY STOCK
VIA DEL LAVORO, 10
61045 Pergola (Pesaro Urbino) ITALY
telephone:+39 0721 73721
telefax:+39 0721 734533
